Allover Super Primer is an economical and reliable solution for preparing walls and surfaces before painting. Designed to seal porous surfaces and enhance paint adhesion, this primer ensures a smooth and even topcoat finish. Part of our Economy Series, Allover Super Primer offers excellent coverage and durability, making it the perfect choice for budget-friendly yet effective surface preparation.
Application Process for Allover Super Primer:
- Surface Preparation:
Before applying Allover Super Primer, ensure the surface is clean, dry, and free from dust, grease, or any loose particles. For best results, sand rough surfaces and remove any peeling paint. - Stir Well:
Open the Allover Super Primer can and stir thoroughly to ensure an even consistency of the product before application. - Application:
Using a brush, roller, or spray gun, apply an even coat of Allover Super Primer to the prepared surface. Ensure that the primer is spread smoothly and evenly, covering all exposed areas, including corners and edges. - Drying Time:
Allow the primer to dry for approximately 2-3 hours before applying the topcoat. Drying times may vary depending on the temperature and humidity conditions, so ensure the surface is fully dry before proceeding. - Second Coat (if needed):
For surfaces with higher porosity, a second coat of primer may be required to ensure a uniform and smooth finish. - Topcoat Application:
Once the primer has dried completely, proceed with applying your chosen topcoat paint. Allover Super Primer enhances paint adhesion, providing a smooth and even finish for the topcoat. - Clean Up:
Clean tools with water and soap immediately after use to prevent the primer from drying on them.
Note: Always follow the recommended thinning ratio if required, and ensure proper ventilation during application for safety.